background image

Owner's Manual & Assembly Instructions

2,4 m x 0,9 m     

246,1 cm x 96,4 cm     

252,4 cm     99,7 cm     166,7 cm         

 239,1 cm      89,4 cm     163,7 cm       

127,6 cm   151,8 cm  

       *Approx.                

    Base                               (Roof Edge to Roof Edge)                            (Wall to Wall)                                    Opening

           Size                     

    Size                             Width       Depth       Height                Width       Depth      Height                Width     Height     

          8' x 3'                      96 7/8" x 38"                   99 3/8"      39 1/4"      65 5/8"              94 1/8"     35 3/16"    64 7/16"             50 1/4"    59 3/4"       

722830319

  Storage Area:    23 Sq. Ft. 122 Cu. Ft.

 

                   2,1 m

2

              3,5 m

3

 

 

BUILDING DIMENSIONS  * Size rounded off  to the nearest foot

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or 

[email protected]

Do not return to dealer, they are not 

equipped to handle your requests.

 

ABR01a

Exterior Dimensions

Interior Dimensions

Door

GS83           GS83EU        GS83LM

                                  GS83SOS        

C

C

C

Model No.

Summary of Contents for GS83C





































Reviews: