Arrow Central Europe GmbH
page 7
User Guide
Everest-CortexM1-Demo
2.2
Handling the Board
Pay attention to the following points while handling or operating the board:
Handle the board with electrostatic discharge (ESD) precautions to avoid damage.
For information about ESD precautions see
https://www.microsemi.com/documentportal/doc_view/126483-esd-appnote
2.3
Board-Setup Revision PROTO
2.3.1 Toggle-Switch S1
– PCIe
Warning: S1-1 and S1-2 must not be at position on at the same time!
SWITCH ON
PCIe LANES
S1-1
x1
S1-2
x4
2.3.2 Toggle -Switch S5
– SC SPI-Flash enable
Warning: S5-1 and S5-2 must not be at position on at the same time!
SWITCH ON
SC SPI-FLASH
S5-1
ENABLE
S5-2
DISABLE
2.3.3 DIP-Switch S8
– FMC Voltage Selector
Warning: S8-1 to S8-4 must not be at position on at the same time!
SWITCH ON
FMC VOLTAGE
S8-1
3.3 V
S8-2
2.5 V
S8-3
1.8 V
S8-4
undefined (not connected)
2.3.4 Toggle -Switch S9
– VDDAUX2 & VDDAUX5 Voltage
Warning: S9-1 and S9-2 must not be at position on at the same time!
SWITCH ON
VDDAUX2 & VDDAUX5
S9-1
2.5 V
S9-2
FMC voltage
