38
●
Parts Needed For
●
Side or Rear Entry Door All Sizes
Step 27
BW38
●
●
●
●
●
7945 Door (1)
●
●
●
●
●
3719 Door Handle Brace (1)
●
●
●
●
●
7947 Vertical Door Brace (1)
●
●
●
●
●
6264 Horizontal Door Brace (2)
STEP
6
STEP
2
STEP
1
STEP
4
STEP
3
STEP
5
NOTE
To assemble door to slide from
left to right (opening), position
door with handle holes on left side
of door. Position handle holes on
right side if door is to slide from
right to left (opening).
Each bolt and screw in the door re-
quires a washer.
1
Attach the door handle brace and
handle to the door with 1 bolt as
shown.
Don't tighten the bolt yet.
2
Swing the door handle brace up to
the hole in the center of the door and
insert a screw.
3
Hold the vertical door brace
against the center of the inside sur-
face of the door and turn the screw to
hold the vertical door brace and door
handle brace in place. Fasten to door
above and below center connection
using 2 screws.
4
Insert a second bolt in the door
handle and tighten both bolts.
5
Put a horizontal door brace onto
the top edge
and bottom edge and
fasten
with 1 bolt in the center.
6
Attach the lower door guides as
shown.
