The roof beams support the roof
panels. The roof beam is made up of
two pieces overlapped at the center.
Hint: These pieces are force-fitted,
so you may have to press hard to join
them together.
1
Place the end of one roof beam
inside a second roof beam so that
the six holes in each piece align. Do
not insert bolts yet.
2
Fasten the pressed-together roof
beam with eight bolts.
3
Double check the length and set
this piece aside for later use.
Step 3
ABY16
Parts Needed For
Roof Beam Assemblies
10571 Roof Beam (2)
(8)
10571
STEP
1
10571
119 7/8"
304,5 cm
10571
STEP
2
10571
119 7/8"
304,5 cm
16
