Chapter 3: Install and replace the battery (TM804G only)
3.
Note:
Batteries will not insert completely into the Telephony Modem if not
oriented correctly. The battery should slide into the bay without significant force.
Line up the slots in the battery bay with the guides on the battery and apply even
pressure on both ends of the battery.
Push the battery pack into the bay until it latches into place. If you are taking the
battery out of the Telephony Modem, use the battery pull strap to dislodge the battery.
TheTelephony Modem will not begin operating until you apply AC power.
4. Replace the door by placing the tabs of the battery door into the slot on the Telephony
Modem battery compartment. Rotate the door toward the front of the Telephony
Modem until the latch snaps back into place. The Telephony Modem uses a Lithium-Ion
battery pack. Please recycle or dispose of the battery responsibly and in accordance with
local ordinances.
Install and replace the maximum battery
1. Press down and pull back on the latch holding the battery door (on the bottom of the
Telephony Modem). Pull the door toward you. Set the door aside in a safe place.
Touchstone TM804 Telephony Modem User Guide STANDARD Revision 1.2
20
