Chapter 4
:
Installing and Connecting your Telephony Gateway
2.
Insert the plug from the power cord into the Power connector on the back of the
Telephony Gateway (7) and insert the power cord into a convenient AC outlet.
Note: Use only the external AC power adapter (if provided) and power cord included with the
equipment.
Note: Make sure that the rear panel power switch (8) is set to the ON position.
The Power light on the front of the Telephony Gateway lights up, then flashes once (refer to the
LED tables shown in Using the Telephony Gateway). See
(page 37) if the Power
light does not turn on.
3.
Connect one end of the Ethernet cable to any Ethernet port on the back of the
Telephony Gateway, (3) and the other end to the Ethernet port on a computer, hub, or
broadband router.
Note: If you are connecting to a computer, use the Ethernet cable included in the Telephony
Gateway package.
4.
Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway (1 or 2). Connect the other end to the telephone.
Configuring Your Wireless Connection
The TG2492 ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.
Note: You must set up your computer and other client devices to work with the security
settings on the TG2492. Refer to the documentation for your client device for instructions
on setting security. On most computer systems you only need to select the network name
(SSID) device and enter the encryption key. If your computer or client device supports Wi-
Fi Alliance WPS (Wireless Protected Setup), activate WPS on your computer or client
device and the TG2492 simultaneously to easily set up your system security.
Release 24 STANDARD 1.1 March 2015
Touchstone TG2492 Telephony Gateway User Guide 23
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.