Chapter 4
:
Installing and Connecting your Data Gateway
Note: Setting the transmit power level to High increases the range. Setting it to Medium or
Low decreases the range proportionately.
Connecting the Data Gateway
1.
Connect one end of the coax cable to the cable outlet or splitter, and the other end to
the Data Gateway’s Cable connector (3). Tighten the connections by hand, then tighten
an additional 1/8 turn with a wrench.
Note: For best performance, use high-quality coax cable and minimize or eliminate
splitters between the cable jack and the Data Gateway. If you are using MoCA for your home
network, MoCA filters must be installed on any legacy client devices. Your cable company will
install these filters for you.
Release 24 STANDARD 1.3 February 2015
Touchstone DG2470 Data Gateway User Guide 20
