Arris CHP Max5000, Equipment Manual

Page: 99 / 267

Rev D CHP Max AC Power Supply 4-17
AC Power Supply Specifications
Table 4.6 CHP AC Power Supply Specifications
Characteristic Specification
Electrical
CHP-PS/AC1-Q CHP-PS/AC1-SW
Input Voltage (47 to 63 Hz) 85 to 264 V
AC
85 to 264 V
AC
Input Current Limit, max., continuous,
RMS
6.0A 9.0A
Inrush Current Limit, max., peak 30A 40A
Input Transient
(IEEE C62.41-1991 Category B 1.2,
50 μ s)
4kV/0.13kA 4kV/0.13kA
Power Consumption, max. 250W 475W
AC Input Inlet Connector IEC 320-C14 (mates with IEC 320-C13
power cord)
IEC 320-C14 (mates with IEC 320-C13
power cord)
Output Voltages and Current 12.0 (+0.35/–0.0)V
DC
@ 10A
5.0 (+0.2/–0.05)V
DC
@ 22 A
–5.0 (+0.05/–0.2)V
DC
@ 1.8 A
3.5 (±0.1)V
DC
@ 2.2 A
12.0 (+0.35/–0.0)V
DC
@ 2.3 to 24A
5.0 (+0.2/–0.05)V
DC
@ 31 A
–5.0 (+0.05/–0.2)V
DC
@ 2 A
3.5 (±0.1)V
DC
@ 5A
Output Noise Ripple, RMS (at 300 kHz,
10 μ F capacitor in shunt with 0.1 μ F)
25mV @ 12.0V output
25mV @ 5.0V output
20mV @ –5.0V output
20mV @ 3.5V output 25mV @ 12.0V output
25mV @ 5.0V output
20mV @ –5.0V output
20mV @ 3.5V output
Efficiency, min. 68% 68%
Power Factor 0.9 0.9
Status Interface
CHP-PS/AC1-Q CHP-PS/AC1-SW
Functions Monitored All DC Voltages, Internal Temperature,
Fan Currents
All DC Voltages, Internal Temperature,
Fan Currents
Mechanical
CHP-PS/AC1-Q CHP-PS/AC1-SW
External Dimensions (W x H x D) 3.9 x 1.57 x 14.46in (9.91 x 3.99 x 36.73
cm)
3.9 x 1.57 x 14.46in (9.91 x 3.99 x 36.73
cm)
Weight 2.75lb (1.2kg) 2.75lb (1.2kg)
Environmental
CHP-PS/AC1-Q CHP-PS/AC1-SW
Operational Temperature Range 32 to 122°F (0 to 50°C) 32 to 122°F (0 to 50°C)
Storage Temperature Range –40 to 158°F (–40 to 70°C) –40 to 158°F (–40 to 70°C)
Humidity, max., noncondensing 95% 95%
Specifications subject to change without notice