Page 4 of 42
Attach
a
Salt Water Switch via a cable to the Salt Water Switch picoblade connector (top edge connector)
Attach the USB micro B cable between a Linux PC and the micro USB connector (left edge, lower connector)
Attach
a Lithium-ion or Lithium polymer battery to the JST connector
(left edge, upper connector)
3.0.0.1.
Connecting Horizon modules
There are two compatible modules currently available. A SARA-U270 Cellular module and an ARTIC RS
Argos Satellite module. Both modules are connected to the GPS board via the picoblade connector.
Attach the
a
ntenna via a cable to the U.FL antenna connector (left edge connector)
Attach the
Horizon
board
to the
module via the picoblade connector (edge)
Arribada Horizon ARTIC R2 Developer’s Kit | User Manual
ARTIC R2
Developer's Kit Contents:
1 x Horizon board
1 x ARTIC R2 module (daughterboard)
1 x Picoblade cable assembly
1 x MicroUSB cable
The main Horizon board accepts either an ARTIC R2 module, or a Cellular SARA-U270 module.
Use the included Picoblade cable (Developer's Kit) assembly to connect a module to the Horizon board.
4.2V min to 5.4V max input supply voltage (single use primary cells).
3.4 to 4.2V max input supply voltage (lithium rechargeable cell).
Connectors / preparation;