Page 38 of 42
usage: tracker_config [-h] [--ble_addr BLUETOOTH_ADDR] [--debug]
[--write WRITE] [--read READ] [--read_log READ_LOG]
[--battery] [--status] [--erase]
[--erase_log] [--create_log CREATE_LOG] [--reset
RESET]
[--test_mode TEST_MODE] [--protect] [--unprotect]
[--setdatetime SETDATETIME] [--getdatetime]
[--firmware_type FIRMWARE_TYPE] [--firmware FIRMWARE]
[--version]
optional arguments:
-h, --help show this help message and exit
--ble_addr BLUETOOTH_ADDR use bluetooth as communications backend
connecting to device xx:xx:xx:xx:xx:xx
--debug enable debug trace
--write FILENAME write the JSON configuration file to RAM
storage on the tracker
--read FILENAME read the current RAM storage on the tracker
the specified JSON file
--read_log FILENAME read the current log file (binary format)
to the specified filename
--battery
read the current battery level and display
--status
read the current device status and display
--erase
erase the current RAM configuration to
defaults
--erase_log erase the current log file in flash memory
--create_log LOG_TYPE create a log file of the specified type
(LINEAR, CIRCULAR)
--reset RESET_TYPE reset the system with the specified type
(CPU, FLASH)
--test_mode TEST_MODE apply test mode flash as a comma separated
list of items (allowed: GPS, CELLLAR, SATELLITE)
--protect protect the current configuration file from
changes
--unprotect unprotect the current configuration file
from changes
--setdatetime DATETIME set the current RTC date and time
--getdatetime get the current RTC data and time and
display
--firmware_type FIRMWARE_TYPE upload a new firmware file of the specified
type (allowed: ARTIC)
--firmware FILENAME firmware update filename
--version display this application's version number
7.7.3. cellular_config
Arribada Horizon ARTIC R2 Developer’s Kit | User Manual