ARRI Tilt Focus
9
4. Mounting the Lens
• Pull tight the clamp on the lens for lens rotation
➪
photo
.
• Open the bayonet ring on the lens mount receptacle
of the camera completely by turning anti-clockwise.
• Push the lens into the lens mount receptacle
without catching it. The slot on the lens mount
must fit over the index pin.
• Press the lens flat onto the lens mount receptacle
and close the bayonet ring by turning clockwise.
clamping for rotating the lens
Summary of Contents for Tilt Focus
