ARRI IVS 435, Instruction Manual

Page: 31 / 125

ENTER
INSERT
MODE
STO
MGC
WB
FR
IND
OTD
ATW
MAN
ON
ON
STO
CMP
31
Standard Video Controls
• If automatic White Balance (ATW) is selected § ,
the IVS will automatically set White Balance.
For this no manual steps are necessary.
• If indoor (IND) is selected § , white balance is
optimized for tungsten lighting with 3200 K.
• The outdoor (OTD) setting § optimizes the
white balance for daylight with 5600 K.
To access the manual setting, press the WB key §
until the MAN LED is on. By pressing the WB key again, the
MAN LED will blink, indicating, that the manual white
balance mode is active. Now the red of the video image can
be increased, using the color coded red key or reduced
using the key. Blue can be increased by using the color
coded blue key or reduced by using the . By either
waiting more the 5 seconds or pressing the WB key again,
the MAN LED will stop blinking and is constantly on,
showing that the color setting is manual.
Note: With the MAN LED constantly on, no color
settings can be made to avoid accidental handling.
Note: Changing green is done by changing red, blue
and gain. The video singal is the addition of
red, green and blue and amplified by the gain.
Increasing green can be done by decreasing
red and blue and increasing gain.
• White Balance Key
Manual selected •
• Color coded keys