6
Ordercode: 60455
Mirrorball Motorcontroller
Description of the device
Features
The Arnold Lichttechnik Mirrorball Motorcontroller is a mirror ball control system.
●
Input voltage: Power adapter 12 V to 240 V AC, 50 Hz
●
Power consumption: 10 W
●
Control modes: DMX-512
●
Rotation speed: 0,5 RPM
●
Maximum load: 500 kg
●
Onboard: OLED display for easy setup
●
DMX channels: 1, 2 channels
●
Connections: 5-pin DMX IN/THRU, 3-pin power IN, 4-pin motor OUT
●
Housing: Metal & flame retardant plastic
●
IP rating: IP20
●
Dimensions: 129 x 105 x 105 mm (LxWxH)
●
Weight: 0,8 kg
In order to be able to use this device, you need to purchase the 60450 – Mirrorball Motor
to 500kg DMX as well as the power cables listed below.
– Mirrorball Motor to 500kg DMX
– FL81, XLR/M 4-pin > XLR/F 4-pin cable (6 m)
– FL81, XLR/M 4-pin > XLR/F 4-pin cable (10 m)
– FL81, XLR/M 4-pin > XLR/F 4-pin cable (20 m)
Front
Fig. 01
01)
OLED d LED indicators and control buttons
●
POWER: If the LED is on, the power is on.
●
DMX OK: If the LED is on, DMX signal is present.
●
MANUAL: If the LED is on, Manual mode is active.
●
ERROR: If the LED is blinking, the current is too high. If the LED is on, the device will turn off to
prevent overload.
02)
Transport handle