Atlanta
English
05060191 00 06-2021
10
i
DO NOT use transportation procedures other than those indicated.
12. Storage
Remedy
•
store the cabinets indoors, at a temperature between -25°C and +55°C and an
air humidity between 30% and 90%.
•
before storing the cabinets, check that the packing is intact and that it does
not display any defect that may compromise preservation of the cabinets.
What to avoid
UV rays. Permanent deformation of plastic materials /damage of cabinet
parts.
DO NOT store the cabinets in uncovered areas exposed to atmospheric
agents and to direct sunlight.
13.
Installation and environmental conditions
DANGER! Live parts. Electrocution.
The regulations and laws in force must be complied with during installation and use.
WARNING!
Before carrying out any operation, take all possible precautions to prevent injury to the
operator, use the Personal Protection Equipment provided (chap.3).
CAUTION
! Discarded packing parts. Injury.
Do
not leave packing parts (nails, wood, staples, etc.) and tools used for the operation (pliers,
scissors, etc.) in the working area.
These objects must be removed with appropriate means and taken to their respective col-
lection places.
Installation is reserved to technicians trained and authorised by the body specified in the
contract (manufacturer/dealer/distributor)
i
-
It is the responsibility of the customer to prepare the installation area
-
Changes to the set-up described here must be authorized by ARNEG S.p.A.
The cabinet can be delivered packed as follows:
•
standard: wooden frame secured to the base and nylon cover held by straps (Fig.6)
•
optional: cardboard box (Fig.7); wooden crate (Fig.8)
The installation
area should
•
comply with the local standards in force
•
comply with the environmental climatic class chap.8
•
have a floor able to support the weight of the cabinet
•
be equipped with a switch with automatic protection against short circuits,
earth discharge and leakage circuit between the electric power line and the
cabinet
•
provide the space required for correct ventilation, use and maintenance.
Conditions
environmental
For the cabinet to work properly, the room temperature and relative humidity
must not exceed the limits of climate class 3 (+25°C; R.H. 60%) according to
standard
E
N ISO 23953
.
Reception of the
cabinet
•
ensure the packing is intact and that it does not display readily apparent dam-
age
•
carefully perform the unpacking operation in order not to damage the cabinet
•
check that cabinet components are intact
•
should you notice any damage, inform the manufacturer immediately.
Summary of Contents for Atlanta
Page 2: ......
