Charging
THE MOST TECHNICALLY ADVANCED
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the product.
USER MANUAL
Handy C1 Pro
Portable charger with Powerbank function
1.
Install cable into Micro-USB socket of the charger.
2.
Place
Li-Ion, IMR, Ni-MH, Ni-Cd
battery with the positive
contact (+) facing the top of the charger.
All LEDs will show
the charge current at the start: green - 0.5A, red - 1A.
Always you can see an actual charge
level.
Green light blinking shows
which charge stage is going
:
>0%, >25%, >50% or >75%.
If the charge is finished then all LEDs
will stay green and stop blinking.
We DO NOT RECOMMEND to leave
batteries
inside the
charger
for a long storage period, as batteries can leak
for various reasons and damage the inner parts of the
charger
. If you have noticed any signs of batteries'
defects
then
withdraw them from the
charger
and utilize.
Finished
>0%
>25% >50% >75%
Powerbank function
The orange LEDs show current battery
level: >75%, >50%, >25% or >3%.
If the battery level is less than 3%
the orange LED will start blinking.
>0%
>3%
>25%
>50%
>75%
To start the powerbank function
connect the charger to
your device with the cable, then install a Li-Ion battery.
Constant 4 red lights after 15 minutes of charge: you could try again the charging, but we suggest to
change this battery.
