Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
FLASHLIGHTS IN THE WORLD
THE MOST TECHNICALLY ADVANCED
Model
Barracuda
LED
Cree XP-L
Optics
Smooth Ultra -Throw Reflector
Brightness stabilization type
FULL (in all modes)
Light output, LED / OTF lumens*
1450 / 1200
Peak beam intensity, candelas
114000
Hotspot/spill
5
°
/
4
0°
Beam distance
*
675
meters
Hotspot diameter at 100
meters
9 meters
Modes and runtimes (measured for Armytek 18650
Li-Ion 3100 mAh to the decrease to 10% of initial
brightness)
Firefly: 2lm /
36
d
Main1:
70
lm /
60
h
Main2: 200lm /
13
h
40min
Main3: 4
4
0lm /
5h 20min
Max: 1
20
0lm / 1h
30min
Strobe: 10 Hz / 3h
Power source
2
x18650 Li-Ion /
4
x
18350
Li-ion /
4
xRCR123 Li-ion /
4
xCR123A
Size
Length
262
mm, body diameter 2
5.4
mm, head diameter
64
mm
Weight (w
ithout
batteries)
303g
Armytek Optoelectronics Inc.
is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs applying in them components made in the USA and Japan.
.
10 years no-hassle warranty
§
Extreme brightness
LED lumens
1450
§
Unprecedented beam distance up to 675 meters for efficient illumination of large areas
§
Ultra-strong materials and thoroughly thought-out construction guarantees total protection harsh impacts or vibrations
§
Light-weight but saving its excellent light characteristics and fail-proof reliability
§
Simple operation and continuous runtimes –
at middle mode
1.5
hours at maximal mode and
almost
1
4
hours
§
Constant brightness even when the batteries are almost discharged and at -25
°
C frost
§
The highest IP68 dust- and waterproof standard - more than 5 hours at 50 meters depth
§
Guaranteed durability — stands up the recoil of any gun gauge and falling from 30 meters height
Warnings
Armytek Optoelectronics Inc. shall not be liable for any harm done to the user if it
was caused by improper use of the product.
1.
Always follow the instructions from this manual and recommendations on battery usage.
2.
Apply only the recommended power sources.
3.
Do not reverse battery polarity.
4.
Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5.
Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6.
Do not allow water or any other liquid to leak into the flashlight.
7.
Do not aim a turned-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8.
Do not allow children to use the flashlight without your assistance.
Care and Storage
It is recommended to clean the threads and O-ring
s
off dirt and old grease. Remember that secure protection from water and dust
cannot be provided by worn out sealing. And fouling as well as lack of lubricant cause fast wear-out of threads and sealing rings.
To clean the threads do the following:
1.
Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2.
Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3.
Clean the metal threads with a brush using ethanol. Be careful not to allow applied liquid to get inside the flashlight or tailcap as it
can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required, even if it is more than twice a year.
Service and Warranty
Specifications are subject to change without notice.
Armytek provides free warranty repair for 10 years from the purchase.
Warranty doesn't cover damage caused by:
1.
Improper usage.
2.
Attempts to modify or repair the flashlight by nonqualified specialists.
3.
Longtime application in chlorinated or polluted water, or other liquids (other than water).
4.
High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5.
Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email:
Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada
* Light outputs for flashlights with Warm light are about 7% less, beam distances are about 3% less.
In case the rubber button is damaged, it should be replaced. In the same way you can also
replace the switch with the spring.
Replacement order:
1.
Unscrew the tailcap.
2.
Unscrew the first washer inside it to take out the switch. To do so you should use needle-
nose pliers (round-nose pliers or another tool: most suitable will be expansion pliers). Use
the tool as it is shown at the picture. To replace the rubber button unscrew the second
washer under the switch.
3.
Replace the rubber button and assemble the parts in inverse sequence.
Do not disassemble the flashlight except for unscrewing the thread ring gage and replacing the rubber button. There are no
other parts in the flashlight that can be replaced by the user.
Do NOT use Li-Ion batteries without protection (PCB).
We highly recommend NOT to use LOW-QUALITY CR123A
batteries as
a power source for often and continuous flashlight’s operation. Remember that old or low-quality disposal batteries can be
damaged under heavy load and explode.
Barracuda
1.
2.
