DTS-
ТОР
MULTIFUNCTIONAL TELEPHONE
User Manual
armtel.com
page 19/51
© Armtel
2 INTENDED USE
The product is designed for continuous 24-hour a day operations. After
commissioning, the product does not require operator intervention, unless:
−
maintenance;
−
product configuration changes.
Maintenance personnel must be strictly guided by this document in compliance with
safety regulations.
The product along with the operational documentation is delivered to the customer in
packaged form.
2.1 OPERATING LIMITS
2.1.1 The product shall be used under exposure factors and ambient parameters
which do not exceed permissible values given in
2.1.2 DTS-TOP
power is supplied from PoE injector under IEEE802.3at standard,
it is allowed to connect to it no more than two DTS-TOP
Expansion units. The use of
more than two Expansion units is permitted only if the unit is powered by from an
external 12 V power supply with a power of at least 25 W.
2.1.3 The requirements for operating conditions and the choice of installation
site, observed in the visible ED, take into account the most characteristic factors that
affect the operation of the DTS-TOP.
Factors that cannot be predicted, estimated or verified, and which the manufacturer
was unable to factor in during development may exist or arise during operation at the
operating facility.
In the event of such factors, find another operating site where said factors do not exist
or do not affect operation of the product.
2.2 PREPARATION FOR USE
Preparation of DTS-
ТОР
for use shall be carried out by the manufacturer’s
representatives, or personnel trained to operate Armtel LLC products. The main preparation
of the product for use is carried out during installation and connection. Preparation of
DTS-
ТОР
for operation involves a series of steps:
−
checking package contents in accordance with the scope of supply;
ENG
