ARMTEL ARMT.665200.003UM, User Manual

Page: 26 / 48

DCN-2 CENTRAL EXCHANGE
User Manual
page
24/44 armtel.com
© Armtel info@armtel.com
ENG
6. Carry out electrical installation and connection DCN-2 (see 2.4).
2.3 Safety measures when using the product for its intended purpose
When using DCN-2 for its intended purpose, it is necessary to comply with the
requirements of safety measures defined by the "Rules on Labor Protection during Operation
of Electrical Installations" when working with electrical receivers with a voltage of up
to 1000 V.
In order to avoid electric shock, it is forbidden to operate the product with damaged
power cables and interfaces.
It is strictly forbidden to disassemble the product connected to the control panel.
Do not use the product in rooms with high humidity (above 80%) or the presence
of conductive dust.
To ensure fire safety, follow the following rules:

before connecting the product to the power supply, make sure the power and
communication cables are properly insulated;

protect power and communication cables from damage.
2.4 Installation, connection, and dismantling
2.4.1 When choosing the installation site for the product, please, pay attention to the
following points:

avoid placing the product near power electric machine or other electrical
equipment, which may result in a malfunction of the product;
 the location of the product must be chosen so, as to avoid contact with direct
sunlight;

the location of the product must be clean, dry, and remote from external sources
of radiant heat.