Armstrong Medical AquaVENT FD140, Instructions For Use Manual

Page: 24 / 96

4 Preparing the device for operation
22 Instructions for Use, AquaVENT
®
FD140, Rev. 12
4.1 General information
Caution
Before each use, the device must be checked for
visible damage.
A quick reference guide for putting the AquaVENT
®
FD140 into operation is
provided in chapter 10 Navigation.
4.2 Power supply
4.2.1 Mains supply
The AquaVENT
®
FD140 is designed for a supply voltage ranging from 90 to
240 V
AC
at 50 to 60 Hz without switchover.
Before connecting the device to mains power, check the power cord for
damage.
Warning
Do not use the power cord if it is damaged.
Warning
This device must only be connected to a power supply
with a protective earth conductor to avoid the risk of
electric shock.
Power input
Type plate