INSTRUCTIONS MANUAL
FEATURES
SELECTING FEATURES
SETTING THE TIME AND CALENDAR
12/24 HOUR (MILITARY) TIME
CHRONOGRAPH
LAP OPERATION
•
Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the
Week)
•
Calendar Mode (Month, Date, and Day of the Week)
•
24 Hour Alarm
•
Hourly Chime: One ‘Beep’ sound every full Hour
•
Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a sec-
ond with Lap Operation
•
Countdown Timer
•
Second Time Zone
•
12/24 Hour (Military Time)
•
Water Resistant as indicated on the watch
•
INSTALITE - Electro Luminescent Display
1.
Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of
the Week.
2.
From Time Telling Mode, press and hold ‘C’. Calendar Mode appears
and the Month, Date, and Day of the Week are displayed. Release ‘C’ to
return to Time Telling Mode.
3.
From Time Telling Mode, press ‘B’ once. Chronograph appears. Press
‘B’ four times to return to Time Telling Mode.
4.
From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’
three times to return to Time Telling Mode.
5.
From Time Telling Mode, press ‘B’ three times. Timer Mode appears.
Press ‘B’ twice to
return to Time Telling Mode.
6.
From Time Telling Mode, press ‘B’ four times. Second Time Zone Mode
appears. Press ‘B’ once to return to Time Telling Mode.
1.
From Time Telling Mode, press ‘D’. Seconds flash. Press ‘C’ to zero out
the Seconds.
NOTE:
Zeroing out 30 or more seconds automatically adds one minute to
time.
2.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
NOTE:
Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour
Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for
‘a.m.’ times.
3.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
4.
Press ‘B’. Months flash. Press ‘C’ to advance the Months.
5.
Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
6.
Press ‘B’. The Day flashes. Press ‘C’ to advance the Day.
7.
Press ‘D’ to end set sequence and return to Time Telling Mode.
1.
From Time Telling Mode, press ‘D’ Press ‘B’ six times to enter the 12/24
Hour (Military Time) Mode. Press ‘C’ to select either 12 Hour or 24 Hour
(Military) Time.
2.
Press ‘D’ to end set sequence and return to Time Telling Mode.
1.
From lime Telling Mode, press ‘B’ once to enter the Chronograph Mode.
2.
Press ‘C’ to start timing.
3.
Press ‘C’ again to stop timing.
4.
Press ‘D’ to reset to zero.
5.
Press ‘B’ to return to Time Telling Mode.
1.
While in the Chronograph Mode, press ‘C’ to start timing.
2.
Press ‘D’ to measure Laps.
3.
Press ‘C’ to stop timing at the end of the event.
4.
Press ‘D’ to reveal the final Lap Time.
5.
Press ‘D’ again to reset to zero.
6.
Press ‘B’ to return to Time Telling Mode.
COUNTDOWN TIMER
1.
From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
2.
Press and hold ‘D’. Hours flash. Press ‘C’ to adjust the Hour.
3.
Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
4.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
5.
When the Countdown Timer is set, press ‘D’ to end set sequence and
return to Timer Mode.
6.
Press ‘C’ to start the Countdown Timer.
7.
If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again
to resume the Countdown Timer.
8.
If desired, press ‘D’ to reset the Countdown time to the preset Count-
down time. Press ‘D’ again, then press ‘C’ to restart the Countdown Timer.
NOTE:
The Countdown timing will continue in any mode until ‘C’ is
pressed. When the Timer counts down below three minutes, an alarm
(‘Beep Beep’) will sound when the Seconds Digit is ‘0’ or ‘30’. When
the Timer counts down below ten seconds, an alarm (‘Beep’) will sound
every second. When the Timer has expired, the alarm (‘Beep Beep Beep’)
will sound for ten seconds or until ‘B’ ‘C’ or ‘D’ is pressed.
9.
Press ‘C’ to stop the Timer.
10
. Press ‘B’ to return to Time Telling Mode.
SETTING THE 24 HOUR ALARM
1.
From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
2.
Press ‘D: Alarm Hours flash. Press ‘C’ to advance the Alarm Hours.
3.
Press ‘B’ Alarm Minutes flash. Press ‘C’ to advance the Alarm Minutes.
4.
Press ‘B’ Alarm Time Zone flashes. Press ‘C’ to select either Time Zone.
NOTE:
The Alarm is available in one Time Zone only.
5.
Press ‘D’ to end set sequence.
6.
Press ‘B’ to return to Time Telling Mode.
XNAIE01
EL LIGHT FEATURE
1.
Press ‘D’ in any mode to illuminate the watch face. The backlight will
remain lit for 2 to 3 seconds.
NOTE:
EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.
ACTIVATING ALARM + HOURLY CHIME
1.
While in Alarm Mode, press ‘A’ to select the Alarm (A1-A3), Hourly
Chime (CH0, and “Beep” sound (BP).
2.
Press ‘C’ to activate or deactivate the selected Alarm, Hourly Chime, or
“Beep” sound.
NOTE:
The Alarm or Chime Symbols appear when the Alarm and Hourly
Chime are activated. “ON” indicates that the “Beep” will sound. When the
Alarm is activated, the selected Alarm will sound at the preset Alarm Time
for 20 seconds or until any button is pressed. When the Hourly Chime is
activated, the Hourly Chime will sound with one “Beep” every hour on the
hour.
3.
Press ‘B’ to return to Time Telling Mode.
SECOND TIME ZONE
1.
From Time Telling Mode, press ‘B’ four times to enter the
Second Time Zone Mode.
2.
Press and hold ‘D’. Hours flash. Press ‘C’ to advance the Hour.
3.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
4.
Press ‘A’ to end set sequence.
5.
Press ‘B’ to return to Time Telling Mode.
NOTE:
The Second Time Zone (Second Time Zone) Clock may be used to
keep track of a foreign time.
