MD0699
LIMITED LIFETIME WARRANTY & INSTRUCTIONS MANUAL
FEATURES
SELECTING FEATURES
SPLIT TIME
SETTING THE TIME AND CALENDAR
1.
Standard display mode: Hour, Minutes, Seconds, Month, Day of the
Week.
2.
Function:
•
Alarm function with buzzer signal output.
•
Chronograph function with lap operation.
•
Hourly Chime
•
12/24 Hour (Military Time).
•
Second Time Zone
•
Water Resistant as indicated on the watch
•
INSTALITE - Electro Luminescent Display
3.
Press ‘A’ Minutes flash. Press ‘C’ to advance the Minutes.
4.
Normal operating temperature range: 10”C-40’C.
5.
Press ‘B’ twice return to Time Telling Mode.
1.
Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of
the Week.
2.
From Time Telling Mode, press ‘B’ once. Alarm Mode appears. Press ‘B’
three times to return to Time Telling Mode.
3.
From Time Telling Mode, press ‘B’ twice. Stopwatch Mode appears.
Press ‘ B’ two times to return to Time Telling Mode.
1.
While in Stopwatch Mode, press ‘D ‘to start timing.
2.
Press ‘A’ to display split time, stopwatch timing continues internally.
3.
Press ‘A’ to clear sp lit time and continue time measurement.
4.
Repeat step 2 and 3 and u can measure the multi-split time.
5.
Press ‘D’ to stop the stopwatch
6.
Press ‘A’ to reset to zero.
7.
Press ‘B’ twice return to Time Telling Mode.
1.
From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘D’ to
zero out the seconds.
NOTE:
Zeroing out 30 or more seconds automatically adds one minute to
time.
2.
Press ‘B’. Hours flash. Press ‘D’ to advance the Hour.
NOTE:
Pressing and holding ‘D’ will advance digits rapidly.
3.
Press ‘B’ Minutes flash. Press ‘D’ to advance the Minutes.
SETTING THE 24 HOUR ALARMS
1.
From lime Telling Mode, press ‘B’ once to enter the Alarm Mode.
2.
Press ‘A’. Alarm Hours flash. Press ‘D’ to advance the Alarm Hour.
3.
Press ‘B’ Alarm Minutes flash. Press ‘D’ to advance the Alarm Minute.
NOTE:
Pressing and holding ‘D’ will advance digits rapidly.
4.
Press ‘A’ to exit the set date.
4.
Press ‘B’ three times to return to Time Telling Mode.
ACTIVATING ALARM + HOURLY CHIME
DUAL TIME ZONE
EL LIGHT FEATURE
1.
While in Alarm Mode, press ‘D’ to deactivate the Alarm and Chime.
2.
Press ‘D’ again to activate the Alarm.
3.
Press ‘D’ again to activate the Chime. The Hourly Chime symbol appears
to indicate the Hourly Chime will sound every hour on the hour.
4.
Press ‘D’ again to activate the Alarm and Chime.
5.
Press ‘B’ three times to return to Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ three times to enter the Second Time
Zone Mode.
2.
Press ‘A’ Hours flash. Press ‘D’ to advance the Hour.
3.
Press ‘ B’ Minutes flash. Press ‘D’ to adjust the Minutes.
4.
Press ‘A’ to end set sequence.
5.
Press ‘B’ to return to Time Telling Mode.
NOTE:
Second Time Zone Clock may be used to keep track of a foreign
time.
1.
Press ‘C’ or the ‘EL’ button in any mode to illuminate the watch face.
The backlight will remain lit for 3 seconds.
NOTE:
EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.
WATER RESISTANCE
This is a
WATER RESISTANT
watch. Do not operate push buttons below
the surface of the water. Should water or condensation appear in the
watch, immediately have the watch checked. Water can corrode electron-
ic parts inside the case.
CHANGING THE BATTERY
Change the battery when the watch becomes slow, the readout darkens or
does not appear, or the backlight fails. Before removing the old battery, be
sure to denote its polarity so that the new battery is installed in exactly the
same way. Replace with the same kind or equivalent only. This watch
contains precise electronic components and should only be opened by
a qualified watch technician. However, it is not necessary to return your
watch to the manufacturer for battery replacement. It is recommended that
you bring your timepiece to a local jeweler.
RETURN YOUR WATCH FOR SERVICING
USE OUR NATIONWIDE SERVICE CENTERS. YOU
CANNOT RETURN WATCH FOR SERVICE WHERE
IT WAS PURCHASED.
Please call
(718) 482-4195
for a listing of all approved and authorized
service centers and locations, or visit our website at:
WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF
PURCHASE. Carefully pack your watch in a sturdy box (do not send in a
gift box for same will not be returned) and mail to the nearest approved
authorized service station. Because of possible loss, we recommend that
you insure the watch, return receipt requested, when using the mail. If you
do not receive a receipt within a reasonable time, start a tracer through
the originating post office. Never include a special watch band or any
other article of personal value in your shipment.
If your watch requires cleaning, lubrication, battery changing, or needs
a crystal replaced, Armitron Adventure approved Service Centers are
available in your area. These repair facilities use Armitron Adventure parts
and components to assure quality and future performance. Free estimates
are available in advance, should you need servicing or repairs not covered
under the warranty. Repairs covered under the warranty may require proof
of purchase, so retain the purchase receipt.
