B08-590
• B75 • 09/22 • GB • p. 12 of 20 • www.armano-messtechnik.com
Operating Instructions
PAXd – Display
5.7
Write Protection
Here you can select whether to enable or disable write protection using a password. If the write protection is
already enabled, the correct password must be entered to gain access. The password must consist of exactly 8
characters, available in the Latin-1 character set. It protects the device against unauthorized configuration mod-
ifications. The device is delivered with disabled write protection. The password 00002008 always grants access
to the write protection menu.
Yes
Save ?
Txt 16
Yes
Enable WP
Txt 47
Yes
No
2
3
********
New Password
Txt 48
(Char list)
2
3
3
Yes
No
2
********
Password
Txt 1
3
(Char list)
2
Yes
Save ?
Txt 16
Dansk
Language
Txt 41
English
Dansk
Deutsch
Fran
ç
ais
Svenska
Italiano
Espa
ñ
ol
2
3
Yes
No
2
*15
Yes
Save ?
Txt 16
HART 7
HART Rev
Txt 51
3
HART 7
HART 5
2
*24
Yes
No
2
*15
*2
34
7501V111-UK
Write-protect
Here you can choose to enable or disable write protection using a password. If write-protection is already enabled, the correct
password must be entered to get access. The password must consist of exactly 8 characters, available in the Latin 1 character
set, and will protect the device against unauthorized modifications to the configuration. The device is delivered default with
write-protection disabled. The password 00002008 always allows access to the write-protection menu.
Language
In this menu you can choose between seven different language versions of the help text that will appear in the menu (see the
section
Display
). You may choose from the following languages: English, Dansk, Deutsch, Français, Svenska, Italiano and
Español.
HART Revision
Changing the HART revision is done from this menu. Select the desired HART revision and press the
button. Select Yes to
effect the change in the Save menu. Please note that changing the HART revision will reboot the device, during which time
the display may become blank for a few seconds. If HART 7 is selected the device will appear as 7501 in the HART interface.
If HART 5 is selected the device will appear as 7501H5/5335V2 in the HART interface.
Only shown if change of protocol is possible
*24
“Monitor”
“Monitor”
No
Yes
“Monitor”
Correct
Only shown if Write-protection is disabled.
*15
Only shown if Write-protection is enabled.
*2
5.8 Language
In this menu you can choose from seven different language versions for the help text that will appear in the menu
(
chapter 5.1 “Display”). The following languages are available: English, Dansk, Deutsch, Français, Svenska,
Italiano and Español.
Only shown if write protection is enabled.
Only shown if write protection is disabled.