www.armano-messtechnik.com • p. 15 of 20 • GB • 09/22 • B1 •
B00-100
Operating Instructions Pressure Gauges
Selection Criteria, Measuring Arrangements, Installation and Operation Manual
13.
CE Conformity
The CE marking of the instruments certi-
fies the conformity with prevailing EU di-
rectives for placing products on the market
within the European Union. The following
directive applies:
2014/68/EU (PED)
Pressure measuring instruments by ARMANO Mess-
technik GmbH with a pressure > 0.5 bar are, defined
as pressure equipment parts, subject to the Pressure
Equipment Directive 2014/68/EU.
Our pressure measuring instruments according to
DIN EN 837-1 “Bourdon tube pressure gauges” re-
ceive the CE-marking in accordance to the conform-
ity assessment procedure if the upper range value is
200 bar and above.
Pressure gauges with flange connections > DN 25 or
1" or thread connection > 1" receive the CE-marking if
the upper range value is 0.5 bar and above.
The CE-marking is placed on the outside of the case:
Pressure gauges with nominal case sizes 40, 50:
ASB 2020
NB 0045
Production Location
Production Location
Grünhain-Beierfeld Wesel-Ginderich
Measuring instruments with a pressure range > 0.5 bar
and < 200 bar, which are subject to article 4 paragraph 3,
do not receive a CE-marking.
ASW 2020
NB 0045
Pressure gauges with nominal case sizes
63, 80, 100, 160, 250, 4 1/2", 96x96, 144x144:
Measuring instruments with a pressure range > 0.5 bar
and < 200 bar, which are subject to article 4 paragraph 3,
do not receive a CE-marking.