EC142 Gate Installation
Quick Start Guide Rev002
Customer Support
1 800 371 0735
A Division Of Countermeasures Security Solutions Inc.
Page | 14
6. Top Rail End Cap Installation
6.1. Top Rail End Caps are side specific. Make sure to
install the left-hand and right-hand Top Rail End
Cap on the appropriate side of the Gate.
6.2.
Insert 3/8” x 6.500” long Hex Head Screw through
the
holes on the side of Top Rail and screw on 3/8”
Nylon Insert Hex Nut and
tighten fully
.
6.3.
Insert the Top Rail
End Cap into the Top Rail
Cavity ensuring the End
Cap threaded hole is
aligned with the
countersunk screw hole.
6.4. Secure the End Cap to Top Rail with the
3/8” Flat Head
Counter Sunk Screw and
tighten fully
with a
7/32” Allen
Wrench.
6.5. Repeat for the second Top Rail End Cap.
