ARM Prospector P1100 User Manual Download Page 13

Page: 13 / 154

xiii

Typographical conventions

The following typographical conventions are used in this document:

bold

Highlights ARM processor signal names, and interface elements
such as menu names. Also used for terms in descriptive lists,
where appropriate.

italic

Highlights special terminology, cross-references and citations.

typewriter

Denotes text that may be entered at the keyboard, such as
commands, file names and program names, and source code.

typewriter

Denotes a permitted abbreviation for a command or option. The
underlined text may be entered instead of the full command or
option name.

typewriter italic

Denotes arguments to commands or functions where the argument
is to be replaced by a specific value.

typewriter bold

Denotes language keywords when used outside example code.

Summary of Contents for Prospector P1100






















































































































































Search results

Summary of Contents for Prospector P1100

Reviews:

ARM Prospector P1100, User Manual, Page: 13 / 154

Search results

Summary of Contents for Prospector P1100

Reviews: