ARM Musca-S1 Technical Reference Manual Download Page 82

Page: 82 / 194

Table 3-22 APBSPPPCEXP0 Register bit assignments (continued)

Bits

Name

Function

[1]

S_SRAM_MPC

Defines the Secure Unprivileged access
setting for the Code SRAM MPC:

0b0

: Secure Privileged access only.

0b1

: Secure Unprivileged and Privileged

access.

Reset value

0b0

[0]

S_QSPI_MPC

Defines the Secure Unprivileged access
setting for the QSPI MPC:

0b0

: Secure Privileged access only.

0b1

: Secure Unprivileged and Privileged

access.

Reset value

0b0

APBSPPPCEXP1 Register

The Expansion 1 Secure Unprivileged Access APB slave Peripheral Protection Control Register
characteristics are:

Purpose

Defines the Secure access settings for the associated APB slave

Peripheral Protection

Controllers

(PPCs) for peripherals on the APB PPC Multiplexer, outside the SSE-200

subsystem.
See the

Arm

CoreLink

™

SSE

‑

200 Subsystem for Embedded Technical Reference Manual (r1p0)

for more information.

Usage constraints

There is a hardware bug in this register. See

B.1 S1 Secure and Non-secure privilege registers

hardware bug

on page Appx-B-184

for the description of the workaround.

Memory offset and full register reset value

See

3.4.6 Secure Privilege Control Block

on page 3-66

The following table shows the bit assignments of the APBSPPPCEXP1 Register.

Caution

The hardware bug in this register prevents it from enabling Unprivileged access, bit[n]=

0b1

, for a

peripheral. See

B.1 S1 Secure and Non-secure privilege registers hardware bug

on page Appx-B-184

for

the description of the workaround.

3 Programmers model

3.4 Base element

101835_0000_01_en

reserved.

3-82

Non-Confidential

Summary of Contents for Musca-S1


































































































































































































Search results

Summary of Contents for Musca-S1

Reviews:

Brands by name

Popular brands

ARM Musca-S1, Technical Reference Manual

Search results

Summary of Contents for Musca-S1

Reviews:

Brands by name

Popular brands