ARM DSTREAM DS-5 Manual Download | Manualshive

Page: 98 / 123

background image

Advanced Customizations

ARM DUI 0482K

Copyright © 2010-2012 ARM. All rights reserved.

11-4

ID120712

Non-Confidential

11.2

Creating custom performance counters

In addition to the hardware-specific and Linux performance counters that you can configure
using the Counter Configuration dialog box, the gator daemon and driver provide hooks that
enable you to customize the counters collected during a capture.

Streamline derives its default set of counters from the performance monitoring unit, linux hooks,
and memory-mapped peripherals. You can add your own counters to this list if there is a
hardware metric that you want to track which Streamline does not provide by default.

11.2.1

The gator_events_mmaped.c example file

In the

gator-driver.tar.gz

archive distributed with your copy of Streamline is a gator source

file called

gator_events_mmaped.c

. The events contained in this file are not included in the

events.xml

file and do not appear in the list of available counters in the Counter Configuration

dialog box. This file was provided as an example of how to add custom counters.

Note

You can locate all of the files provided by DS-5 by selecting

Help

→

ARM Extras...

from the

main menu.

To familiarize yourself with the process of adding your own counters, incorporate the simulated
examples from

gator_events_mmaped.c

into

gator

.

To do so, follow these steps:

1.

Open the

gator_events_mmaped.c

sample file in the editor of your choice.

2.

Copy the xml from the comments section of

gator_events_mmaped.c

.

3.

Open

events.xml

. This file is only available after you have built the gator daemon. If you

built your gator daemon for a Linux target, it is located in the

build_location

/daemon-src

directory. If you built it for Android, it is located in the

build_location

/jni

directory.

4.

Add the copied xml from the comments section of

gator_events_mmaped.c

to events.xml,

just after the closing tag of the Linux category.

5.

Remove any * comment markers from the copied xml.

6.

Save

events.xml

.

7.

Copy

events.xml

to your target. You must place it in the same directory as

gatord

.

8.

Enter

./gatord &

on the command line of your target to restart

gatord

.

9.

Open the Counter Configuration dialog in Streamline. Note that a new category,

mmaped

, appears with the

Sine

,

Triangle

, and

PWM

simulated counters.

10.

Add

Sine

to list of counters.

11.

Run a capture session.

If successful, the waveform generated by the simulated Sine counter appears in the charts
section of the Timeline view.

«
...
96
97
98
99
100
...
»

Summary of Contents for DSTREAM DS-5




























































































































Reviews:

No comments

Related manuals for DSTREAM DS-5

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: Paradox Pages: 4

neutrino series

Brand: Xilica Audio Design Pages: 26

Brand: Edge-Core Pages: 7

Brand: Compaq Pages: 112

FRDM-STBC-SA9500

Brand: Freescale Semiconductor Pages: 2

SuperServer 5019S-L

Brand: Supermicro Pages: 61

Brand: Time domain Pages: 64

Brand: Lanner Pages: 63

Brand: peplink Pages: 2

Brand: ZALMAN Pages: 18

Brand: AMD Pages: 45

Brand: QTech Pages: 406

640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU

Brand: Intel Pages: 105

Brand: Compal Pages: 47

SFD-2 MkIII Jumper

Brand: Anthem Audio Pages: 2

Brand: IEI Technology Pages: 136

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands