Arlo Ultra 2 User Manual Download Page 72

Page: 72 / 92

USB Storage

Ultra Series 4K UHD Wire-Free Security Camera System

User Manual

Format a USB device

The Arlo app displays a pop-up message to let you know if it is necessary to format the USB

storage device. The SmartHub can format the USB storage device.

Do not remove the USB storage device while it is formatting. The USB storage device might

become permanently unusable.

Open the Arlo app.

2. Tap

SmartHub/Base Station/Bridge > Local Storage

If you see the message Requires Formatting, the USB storage device isn’t in the correct

format and you must format it before you can use it for local storage.

3. Tap the

Format USB Device

button.

Wait for USB Device Status to change from Formatting to Ready.

Safely eject a USB storage device

It’s important to safely remove the USB device from your SmartHub. If you remove a USB

device while information is being recorded on it, the USB device might become permanently

unusable or the files on the USB device might be corrupted.

Open the Arlo app.

2. Tap

SmartHub/Base Station/Bridge > Local Storage

3. Tap

Safely Eject USB Device

4. Wait for the Unmounting USB storage device progress message to close.

5. Disconnect your USB storage device from your SmartHub.

Do not interrupt power to the SmartHub or remove the USB device while unmounting the

USB device.

6. The USB icon changes to gray indicating that no USB device is connected.

USB recording is disabled until you connect another USB device.

Summary of Contents for Ultra 2





























































































Search results

Summary of Contents for Ultra 2

Reviews:

Related manuals for Ultra 2

Brands by name

Popular brands

Arlo Ultra 2, User Manual

Search results

Summary of Contents for Ultra 2

Reviews:

Related manuals for Ultra 2

Brands by name

Popular brands