20
Use Your Video Doorbell
Video Doorbell
User Manual
4. Tap
Breathe LED on Motion Detection
to enable or disable this setting.
When Breathe LED is enabled, the LED lights in a slow breathing pattern when
motion is detected. When this setting is disabled, the LED remains off when
motion is detected.
5. Tap
LED on Call Accepted
to enable or disable this setting.
When this setting is enabled, the LED lights solid white when a video call is
accepted and active. When this setting is disabled, the LED remains off when a call
is accepted.
Change the call settings
1. Open the Arlo app.
2. Tap the gear icon next to the Arlo Video Doorbell.
3. Scroll down and tap
Call Settings
.
4. To turn the speaker on your mobile phone on and off, tap
Speaker
.
5. To mute the audio on your mobile phone, tap
Mute
.
6. To allow a visitor to leave a video message if you don’t accept a doorbell call after
20 seconds, or if you decline the call, tap
Leave your message
.
Turn the siren on and off
Your doorbell includes a siren that you can turn on to discourage tampering by an
unwanted visitor. With an Arlo Smart plan, you can activate the siren from the push
notification sent on motion detection.
1. Open the Arlo app.
2. Tap
Siren
on the upper right.
3. Tap
Activate Siren
.
If you have multiple Arlo devices with sirens, you’re prompted to select a device.
4. Swipe the
Siren
icon to the right.
The siren remains active for five minutes or until you turn it off.
5. To turn off the siren, tap the slider at the top of the Devices page.
