Arkray AUTION ELEVEN AE-4022, Operating Manual

Page: 84 / 161

3.3 MEMORY (reprinting and resending measurement results)
AE-4022
3-9
10 Select the search result type
a
Press or several times until the desired measurement
result type flashes.
• : All the measurement results
: Measurement results of normal samples
: Measurement results of abnormal samples
b
Press .
• The selected measurement result type is confirmed and the [Operator ID number input screen] appears.
11 Specify the operator ID number
a
Enter an operator ID number.
• You can enter up to 13 digits using the numeric and keys.
b
Press .
• The measurement results meeting the specified conditions are extracted and printed or transmitted.
When the printing or data transmission is complete, the display returns to the [Menu screen].
REFERENCE:
Different screens appear, depending on the sample data
extraction method selected in step
7 . The screen to the right
shows an example of data extraction by measurement number
range.
NOTE:
If the input value exceeds 13 digits, the first digit (the
leftmost digit) will be deleted.
REFERENCE:
 You can also enter the operator ID number by reading its barcode.
 Do not enter anything if you do not intend to specify an operator ID number.
REFERENCE:
 To interrupt the reprinting or resending of data, press .
The system then stops reprinting or resending data and the
display returns to the [Menu screen].
 If no measurement results meet the selected condition(s),
the [“Not found” error screen] appears, as shown in the
figure. In this case, press
to return to the [Menu screen].