Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 27

Page: 27 / 161

Chapter 1 Before Using the AE-4022

AE-4022

1-10

1.2.4

Operator panel

Key

Name

Function

START

Press to start measurement.

STOP

Press to interrupt measurement, a menu function, setting, or to cancel an
input operation.

FEED

Thermal recording paper is fed to the built-in printer while this key is
pressed.

Press to move between menus or to change pages.

ENTER

This “Enter” key selects a menu or item to be set, or confirms the input
value.

– (hyphen)

Press to select an item to be set, or to input a “– (hyphen)” character.

0 to 9
(numeric keys)

Use these numeric keys to select a menu or to input values.

ID#

Press before inputting a patient ID number.

Left/right

Press to change the measurement mode and to move the cursor.

–

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands