(B)
VG085 Cradle for Sony PSP
Step 1.
Step 2.
Step 3.
Insert PSP into the cradle at a slant so that the base of the PSP
comes to rest on the spring loaded support legs (C).
While firmly holding the cradle, push downward on the PSP so
that the spring loaded support legs slide down. This allows
enough clearance for the top of the PSP to slide under the top
support clip (D).
To remove PSP from cradle follow step 2
Sony PSP Cradle Instructions
(C)
(D)
VG085
Consumer Hotline:
(USA) (800) 841-0884
(INT'L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
© Copyright 2007 Arkon Resources, Inc.
The Mobile Mounting Specialists
TM
PSP is a trademark of Sony Computer Entertainment Inc.
Arkon Resources, Inc. is not affiliated with Sony Computer Entertainment Inc.
Step 1. Attach the PSP cradle to the dual-T tab head (A) by inserting
the T-tabs into the T-slots (B).
Cradle Attachment
(A)
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or
air bag deployment.
Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of the
pedestal mount.
