!
MM327
| Bicycle Handlebar Mount Kit for Magellan®, Mio®, and Navman® GPS
The Mobile Mounting Specialists™
®
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2009 Arkon Resources, Inc.
Package Contents:
(1) CM032-ST-2 - Bicycle handlebar mount
(1) APMM300 - Dual-T pattern adapter plate
CM032-ST-2
Bicycle Handlebar Mount
Safety Precautions
Do not reposition the pedestal while cycling or driving. Arkon
Resources, Inc. does not promote the adjustment of GPS or mobile
devices except when the bicycle or vehicle is safely parked or stopped.
Arkon is not responsible for any damages caused to your bicycle, your
device, or yourself due to the installation or use of this product.
!
Precaution:
Arkon
strongly recommends
using a securing strap to
provide extra protection for your device. Failure to do so may result
in damage to your device. Do not operate portable devices while
riding. Arkon Resources, Inc. assumes no liability for safety of bicycle
rider or portable device.
Step 1.
Step 2.
Choose a suitable location on the handlebars of your bicycle
in which to mount the pedestal.
Unscrew the wing nut
(A)
and remove the screw in order to
open the notch cover plate
(B)
so pedestal can be placed
around the handlebars.
Bicycle Handlebar Mounting
Wrap the rubber rings
(C)
around the handlebar and re-clip
the notch cover plate
(B)
around the rubber rings. Tighten
the assembly by twisting the wing nut
(A)
until it stops.
Step 3.
A
B
C
Step 1.
Step 1.
Step 1.
If your Magellan device has dual-T slots on the back, attach
the unit to the bicycle mount by connecting the dual T-slots
(E)
to the dual T-tabs of the mount
(D)
.
Step 2.
Step 2.
Adjust the angle of the mount and cradle as needed, then
retighten the swivel tightening knob
(F)
to fi rmly secure.
Adjust the angle of the mount and cradle as needed, then
retighten the swivel tightening knob
(F)
to fi rmly secure.
...continued from previous column
Dual-T Device Attachment
E
F
D
APMM300
Dual-T Adapter Plate
Compatible with:
• Magellan Maestro: 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050,
4210, 4215, 4200, 4220, 4245, 4250, 4350, 4370, 4700, 5310, and 5340
• Magellan RoadMate: 1200, 1210, 1212, 1215, 1220, 1230, 1340, 1400, 1412, 1430, 1440,
1470, 1475T, 2000, 2200T, 2250T, 300, 3000T, 3050T, 360, 500, 500 Plus, 6000T, 700, 760,
800, and 860T
• Magellan Triton: 1500, 200, 2000, 300, 400, and 500
• Magellan Crossover: GPS 2500T
• Mio Moov: 300, 301, 310, 330, 330 Europe, 360, 370 Europe, 380, 500, and Knight Rider Ed.
• Navman: S50, S50 3D, S70, S90i
Connect Adapter Plate to Device
Insert the adapter plate into the vertical groove pattern on
the back of the GPS unit (not included, sold separately.)
Connect the dual T-slots
(G)
on the back of the adapter plate
to the dual T-tabs
(D)
on the bicycle mount.
Connect GPS Device to Bicycle Mount
F
G
D
