Agrimag User Guide
14
V1.9 26-4-2019
9. AgrimagP2 SW
9.1. System requirements
There are minimum software requirements of your computer that must be satisfied to ensure that the
software functions properly. These are:
MS Windows 98/ME/NT/2000/XP/Vista/Wndows 7 operating system.
AgrimagP2 software program
RS485 input to your computer
9.2. Installation/Uninstall AgrimagP2 software
If you received the AgrimagP2 SW on a CD, place the CD-ROM with the AgrimagP2 software in your CD
drive. Double-click on the CD-ROM symbol in the "My Computer" folder on the Windows desktop. Then run
the “Setup.exe” in the "AgrimagP2 Software" folder.
The installation package can be downloaded from Arkon website.
To uninstall AgrimagP2
SW in „Settings“ (Start menu), under „Add/remove programs“ you select
AgrimagP2
and then click the „uninstall“ button.
The AgrimagP2 software program consists of two independent sections:
•
The SERVICE section (“Service”)
– This section serves for overall remote configuration
of the flowmeter. You enter this section by clicking "Service" in the above window.
•
The STATISTIC data-
reading section (“Statistic”)
– This section serves for reading/exporting statistical
data for
given time periods from the flowmeter. You can enter this section by clicking “Statistic" in the above
window.
The communication parameters needs to be set same in the device and in the SW
You can add shortcuts to your devices in Device list section by clicking on + sign below window.
Summary of Contents for Agrimag Series
Page 1: ......
