IPM525-S
|
Flexible Gooseneck Seat Bolt or Floor Mount for Apple iPhone® and iPod touch®
CM088-TS-2
15” Flexible Floor Mount
SP-CM088-SBH
360º Swivel SBH Head
(optional)
Floor Mount
Console Mount
Screw the fl exible steel shaft into the seat track bolt bracket.
With a socket wrench, loosen the passenger seat track bolt, in-
sert the seat track bolt bracket, and retighten the seat track bolt.
Step 1.
Step 2.
Position the Floor/Console Bracket and drill into the fl oor or console.
Attach the Floor / Console Bracket with screws and cover with
plastic caps.
Screw the steel shaft into the Floor / Console Bracket.
Step 1.
Step 2.
Step 3.
Adjust the steel shaft by bending with both hands to the
desired location of the male dual T head.
Use the adjustment knob and wing nut on the pedestal head to
swivel or rotate the head position if necessary.
Step 1.
Step 2.
Passenger Seat Bolt Mounting
Floor or Console Mounting
For a more permanent mount, connect the Floor / Console Mount Bracket
to the fl oor or console. This will require drilling into your vehicle’s
interior surface.
Pedestal Head Adjustments
Continued on other side...
For a simple mount that can be easily moved to another vehicle, install
using the passenger seat track bolt.
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
!
Drilling into the dash, fl oor, or console will permanently damage
the vehicle. Use caution and consult a mobile install professional
to avoid drilling into the gas tank, electrical system or other highly
sensitive vehicle components.
1
2
3
Do not place mount in or near an air bag deployment zone or
where it will obstruct view of the road.
!
Compatible with the following devices:
Apple iPhone® 4
•
Apple iPhone® 3GS
•
Apple iPhone® 3G
•
Apple iPhone® Original
•
Apple iPod touch® - All models
•
*Apple
®
, iPhone
®
, and iPod touch
®
are trademarks of Apple Computer, Inc. Arkon Resources, Inc. is not affi liated with Apple Computer, Inc.
Do not place mount in or near an air bag deployment zone or where it
will obstruct view of the road.
!
Package Contents:
(1) CM088-TS-2 - 15” Flexible steel gooseneck fl oor or console mount
Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4)Screws,
(4) Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing
(1) SM050-2 - Slim-Grip™ holder for Apple iPhone and iPod touch®
(1) SP-CM088-SBH - 360º Swivel SBH Head (optional)
SM050-2
Slim-Grip™ Holder for
iPhone & iPod touch
The Mobile Mounting Specialists™
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2010 Arkon Resources, Inc.
