1
2
3
4
5
10
7
6
9
A
Check the liquid value on the
flowmeter setting. Make sure
the mix is correct when starting
disinfection. (See the IFU for
the MultiClean.)
Press the trigger on the spray
handle (A).
To adjust the mix: Use adjustment
screw on the bottle conntector -
screw clockwise to decrease,
anticlockwise to increase.
Put the spray handle back in its
holder (A).
Close and lock the door (A).
Switch the unit off (B).
8
A
A
Unlock and open the door (A).
Verify that there is a bottle of
cleaner or disinfectant on the
shelf inside (B).
Open the water supply (A).
Turn the function selection
control to disinfect (A). Yellow =
disinfect.
Remove the spray handle from
the holder. Direct it away from
you.
Switch the unit on (A).
A
B
B
A
A
A
A
Set disinfection concentration
08.BP.01EN_01 • 08/2020 • Page 1/2
QUICK REFERENCE GUIDE - USE
MultiClean
