Troubleshooting guide
If the equipment fails to operate correctly, the table below suggests some
simple checks and corrective actions. If these steps fail to resolve the
problem, contact ArjoHuntleigh or an approved service agent.
Symptom
Possible Cause
Action
None of the actuators
work
Power cord disconnected
Check the power cord is
plugged in and the
electricity supply is OK
Fuse blown
Check fuse in the power
plug (where fitted)
Control handset
disconnected
Check handset is
plugged into the control
box
One actuator does not
work
Actuator cable
disconnected
Check actuator cable is
plugged into both the
actuator and control box
Castor does not rotate or
swivel
Brake applied
Release brake
746-574-AM-1
54
