Pads for full length side rails CM-ACC03 & CM-ACC26
These washable pads may be used with any of the full-length side rails. They
may also be used when height extensions are attached to the side rails.
The pads are easy to install, and can be removed from the bed quickly if the side
rails need to be lowered in an emergency.
Model CM-ACC26 provides additional protective padding along the top rail.
Installation
Raise the side rail to its full locked height at both ends of the bed. Pull apart the
five Velcro
strips (A) to release the flap (B).
Position the side rail pad (C) on the bed. It should be placed between the
mattress and the side rail, with the flap on the outside of the side rail top rail (or
the outside of the height extension rail, if used).
CM-ACC26 only:
make sure the padded section of the flap lies over the top rail
as shown (D).
Fasten the five Velcro
strips to secure the pad to the side rail.
The diagram shows the side rail pads used withfull length wooden
side rails. Use a similar method when using the pads with full length
steel side rails CM-ACC04.
Cleaning
Refer to the instruction label attached to the product.
Accessory Weight – pads for full length side rails (per pair)
CM-ACC03 & CM-ACC26
8lb.(3.9kg)
B
C
A
746-574-AM-1
34
