16
Safety Belt
Attach and Buckle (4 steps)
1 Attach the safety belt to the chair by pushing the eyelets
over the knobs at the back of the chair.
See Fig. 1.
2 When buckling the safety belt: the arrow shape on the
larger buckle clip
(A)
shall be positioned on the front side of
the safety belt. See Fig.2
3 Buckle the safety belt by inserting the buckle clips into each
other. See Fig. 3
4 Unbuckle the safety belt by pressing the spring knobs at the
top and bottom of the buckle clips
(A)
and at the same time
pulling the buckle clips
apart from each other. See Fig. 4
Adjust (5 steps)
1 Pull the fastening clips
(A)
and
(B)
apart by twisting the
smaller fastening clip
(A)
slightly upwards.
See Fig. 5
Continue with the steps on the next page.
WARNING
To prevent the patient from falling, make sure the
safety belts are undamaged. If damaged, do NOT
use the safety belts, replace with new ones before
use.
WARNING
To avoid falling, make sure that the patient is positioned
correctly and that the safety belt is being used, properly
fastened and tightened.
Fig. 1
Fig. 2
A
Fig. 3
Fig. 4
A
A
Fig. 5
B
A
