Genius X2 4G/VoIP Genius X2| User Manual | Page
4
/
24
Basic Requirements and Environmental Requirements
1.
Read this manual carefully before using this Genius X2. Failure to comply with these
instructions may render the Genius X2 unusable and may void the warranty.
2.
Do not use the Genius X2 on an unstable surface.
3.
Do not use the Genius X2 in a gas station, oil-storage factory, chemical factory, with
explosive gas or explosive producing process, or any place where wireless products
are prohibited.
4.
Do not use the Genius X2 while driving.
5.
While using the Genius X2, please keep it away from any equipment that produces
interference that could affect the performance of the Genius X2.
6.
Using the Genius X2 may interfere with some medical equipment with poor quality
of shield, such as audio-phone and heart pacemaker.
7.
Use a piece of soft cloth to clean the phone. Please do not use chemical products
to clean it. While cleaning the Genius X2, make sure that the power is OFF.
8.
Do not put the Genius X2 under strong sunlight, avoid high temperature or contact
with liquid such as water.
9.
While every effort has been made to create a means to contact emergency numbers,
it is important that the phone is in a configuration that enables it to do so, including
a charged backup battery, internet connectivity (if applicable) and SIM card carrier
availability.
Battery Usage:
In order to use the battery safely and make it reach its best performance, please read the
following instructions carefully.
Always use the battery provided by the supplier.
To avoid damage, the battery must be installed according to this manual.
The phone must be turned OFF before installation or removal of the battery.
Use only the supplied charger to power and charge the Genius X2.
Ensure the battery is fully charged before use, or before the Genius X2 is to be left
unattended for a long period of time.
The display will indicate when the battery is being charged or is full.
