Chapter 1
Overview
This guide is focused on the installation and basic configuration for the Awake Network Detection and
Response (NDR) products. Arista offers the Awake Network Security Platform through its subsidiary,
Awake Security. The AI based software platform operates on a physical appliance or a set of physical
and/or virtual appliances. The hardware can be purchased with a Stock Keeping Unit (SKU) having
the Data Center Automation (DCA) prefix in the format of DCA-NDR-XY, where X is A (All-in-One), NB
(Nucleus), or S (Sensor); and Y is a number indicating a maximum Gb/s rate (currently 1, 5, or 10).
Each of the appliance types have unique characteristics, so be sure to identify the correct appliance
(All-in-one, Nucleus, or Sensor) for the function before beginning the installation tasks.
1.1
Scope
This guide is intended for properly trained service personnel and technicians who need to install and
configure the Awake Security appliances with the following SKU format:
•
DCA-NDR-S1, 1RU Sensor Appliance
•
DCA-NDR-S5, 2RU Sensor Appliance
•
DCA-NDR-NB10, 2RU Nucleus Appliance
•
DCA-NDR-A5, 2RU All-in-One Appliance
Note: Only qualified personnel should install, service, or replace this equipment.
Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.
1.2
Receiving and Inspecting the Equipment
Upon receiving the Awake Security appliance(s), inspect the shipping boxes and record any external
damage. Retain packing materials if you suspect that part of the shipment is damaged; the carrier may
need to inspect them.
If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any
accessories that may be packaged in the same box as the main unit.
Inspect the packing list and confirm that you received all listed items. Compare the packing list with
your purchase order. Appendix B provides a list of components included with the Awake Security
appliance.
1.3
Installation Process
The following tasks are required to install and use the Awake Security appliance:
1. Select and prepare the installation site (
).
2. Assemble the installation tools (
3. Attach the mounting brackets and install the Awake Security appliance in an equipment rack
(
4. Connect the Awake Security appliance to the power source and network devices (
).
1