Power LED: The following table describes the Power LED states.
Table 3: Power LED States Description
Orange
Green
Running at reduced capability
Running at full capability
Solid
Did not receive an IP address
Received IP address, but not connected to the server
Blinking
Reduced capability indicates that the AP is getting lower than the required maximum power from the PoE switch,
i.e., 802.3af instead of 802.3at.
Radio LEDs: ON when the corresponding radio is operational.
Rear Panel of C-130
The rear panel of the C-130 provides an PoE+ Ethernet port that enables you to connect the device to a wired
LAN through a switch or a hub and power the device by using the 802.3af/802.3at standard.
Figure 3: Rear Panel
Table 4: Labels: Rear Panel
Description
Label
Power (DC IN)
1
LAN2
2
LAN1
3
Table 5: C-130 Port Details
Speed/Protocol
Connector Type
Description
Port
--
6.3 mm barrel
Enables you to connect to and
power on device using 12V DC
power with 2.0 ampere.
DC IN
C-130
8
