56
Quick Start Guide: 750 Series Modular Switches
Linecards
Appendix F: Maintenance and Field Replacement
Figure F-1: CCS-75x linecard install
F.4.1
Removing Linecard
Perform the following steps to remove a linecard.
Step 1
Put on a grounded, anti-static ESD strap.
Step 2
Move the left and right handle outwards until the ejector lever releases the linecard.
Step 3
Slide the linecard out using care as the linecard could be heavy.
F.4.2
Removing Linecard Blank
The linecard blank has plastic latches.
Step 1
Put on a grounded, anti-static ESD strap.
Step 2
Grip the plastic handles to release the latch and remove the blank from the linecard slot you
are going to populate.
You may want to save the blank for future use as needed. The blank is needed for the switch to operate
normally if a linecard slot is not populated.
1 Linecard
3 Ejector lever (linecard seated
correctly)
2 Ejector mechanism (lever
and handle)
4 Ejector lever (linecard not
seated)
