Arista 750 Series, Quick Start Manual

Page: 31 / 68

Chapter 4: Cabling the Modular Switch Cabling the AC Power Supplies
Quick Start Guide: 750 Series Modular Switches 25
Figure 4-2: Chassis ground locations (CCS-758)
To power down the switch, r emove all power cords from the power inlets.
4.3 Cabling the AC Power Supplies
The switches use PWR-3351-AC-RED ( Figure 4-3 ) AC power supplies. Power cables are included with
the accessory kit ( Table B-1 ). To power the switch, connect the cables to the C20 connectors on the
PSU inputs, and insert the other side of the cables into the main power providing circuit(s).
Note The power supply, handle color, orientation, etc. may be different in your device from the one shown in
Figure 4-3 .
1 Grounding locations 4 Supervisor modules
2 ESD attach point
3 Line cards