ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
B35-5008-INS-RA
•
PAGE 1
INSTALLATION MANUAL
B35-5008
Parts List
1
3" Bull bar
1
Driver / left frame bracket
1
Passenger / right frame bracket
1
Driver / left support bracket
1
Passenger / right support bracket
6
Hex bolt, M8
10 Flat washer, M8
8
Lock washer, M8
4
Hex nut, M8
2
Bolt plate, M8
2
Plastic retainer, M8
4
Hex bolt, M12
8
Flat washer, M12
4
Lock washer, M12
4
Hex nut, M12
Torque Specifications
M
et
ric
M6 bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
M12 bolt
28 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
5/16" bolt
7 ft-lbs.
3/8" bolt
16 ft-lbs.
7/16" bolt
20 ft-lbs.
1/2" bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
Tools Required
Socket set
Level
Level of Difficulty
Easy
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the last page of this manual for warranty and product registration information.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Product Photo
Brackets and Hardware
Passenger / right
rame bracket
M8 Bolt plates
M8 Plastic
retainers
Driver / left
frame bracket
Passenger / right
support bracket
Driver / left
support bracket
