ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2156001-INS-R
C
•
PAGE 1
INSTALLATION MANUAL
2156001
Parts List
1
TrailCrusher
™
bumper
4
Button-head cap screw,
1/2" - 13 x 3 1/2"
2
Button-head cap screw,
1/2" - 13 x 2"
6
Flat washer, 1/2"
6
Lock washer, 1/2"
4
Backup washer
Torque Specifications
1/2" bolt
64 ft-lbs.
Use above torque setting unless otherwise noted
Tools Required
Torque wrench
Socket extension
Socket set
Torx drive, T55
Hex drive, 5/16"
Level
Level of Difficulty
Moderate
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Product Photo
