background image

EN - 3

• Record Unit Model and Serial numbers 

here.

• Record Engine Model and Serial numbers 

here.

PRODUCT REGISTRATION

The Ariens dealer must register the product at 
the time of purchase. Registering the product 
will help the company process warranty claims 
or contact you with the latest service 
information. All claims meeting requirements 
during the limited warranty period will be 
honored, whether or not the product 
registration card is returned. Keep a proof of 
purchase if you do not register your unit. 

Customer Note:

 If the Dealer does not 

register your product, please fill out, sign and 
return the product registration card to Ariens 
or go to www.ariens.com on the internet.

UNAUTHORIZED REPLACEMENT 
PARTS

Use only Ariens replacement parts. Replacing 
any part on this vehicle with anything other 
than an Ariens authorized replacement part 
may adversely affect the performance, 
durability, or safety of this unit and may void 
the warranty. Ariens disclaims liability for any 
claims or damages, whether warranty, 
property damage, personal injury or death 
arising out of the use of unauthorized 
replacement parts. To locate your nearest 
Ariens Dealer, go to www.ariens.com on the 
internet.

DELIVERY

Customer Note:

 If you have purchased this 

product without complete assembly and 
instruction by your retailer, it is your 
responsibility to:

• Read and understand all assembly 

instructions in this manual. If you do not 
understand or have difficulty following the 
instructions, contact your nearest Ariens 
Dealer for assistance. To locate your 
nearest Ariens Dealer, go to 
www.ariens.com on the internet.

• Do not operate the unit unless all controls 

function as described in this manual.

Before attempting to operate your 
unit:

1. Make sure all assembly has been 

properly completed.

2. Understand all Safety Precautions 

provided in the manuals.

3. Review control functions and operation of 

the unit.

4. Review recommended lubrications, 

maintenance and adjustments.

5. Review Limited Warranty Policy.
6. Fill out Original Purchaser Registration 

Card and return the card to Ariens 
Company or go to www.ariens.com.

DISCLAIMER 

Ariens reserves the right to discontinue, 
change, and improve its products at any time 
without notice or obligation to the purchaser. 
The descriptions and specifications contained 
in this manual were in effect at printing. 
Equipment described within this manual may 
be optional. Some illustrations may not be 
applicable to your unit.

SAFETY ALERTS

Look for these symbols to point 
out important safety precautions. 
They mean:

Attention!

Personal Safety Is Involved!

Become Alert! 

Obey The Message!

The safety alert symbols above and signal 
words below are used on decals and in this 
manual.

Read and understand all safety messages.

WARNING: 

Improper assembly 

or adjustments can cause 
serious injury. 

SAFETY

Summary of Contents for 946152























Reviews: