Ariens 017000, Operator'S Manual

Page: 23 / 30

EN - 21
TROUBLESHOOTING
Problem Probable Cause Correction
Engine will not
start.
Engine switch in off
position. Move switch to on position. See Engine Switch on
page 10.
Fuel valve is closed. Open the fuel valve. See Fuel Valve on page 10.
Fuel tank is empty. Fill fuel tank. See Before Operation on page 13.
Spark plug
disconnected. Connect spark plug.
Faulty spark plug. Replace spark plug.
Choke lever in wrong
position. Adjust choke lever position. See Choke Control
Lever on page 10.
Faulty engine. See your Ariens Dealer.
Engine
overheats. Debris accumulated on
engine and cooling fins. Clean debris from engine and cooling fins.
Cylinder does
not extend or
retract when
control lever is
moved.
Low hydraulic oil level. Refill hydraulic oil to proper level. See Check
Hydraulic Oil Level on page 18.
Kinked or pinched
hydraulic lines. Repair or replace damaged hydraulic lines.
Hydraulic drive coupling
broken. Replace hydraulic drive coupling. See
Maintenance on page 18.
Faulty hydraulic pump. See your Ariens Dealer.
Faulty control valve. See your Ariens Dealer.
Excessive
vibration or
noise from
hydraulic drive
coupling. Worn or damaged drive
coupling. Replace hydraulic drive coupling. See
Maintenance on page 18.
Erratic
movement of
cylinder. Air in hydraulic system. Purge air from hydraulic system. See Purge Air
From Hydraulic System on page 19.
Control lever
sticks.
Debris in control lever
linkage. Clean and lubricate linkage.
Dented rear cap on
control lever valve
assembly. See your Ariens Dealer.