MicroCAM User Manual
Page 14/82
5.2.
DATE & TIME
WEB INTERFACE > BASIC SETUP > DATE AND TIME
Current date and time and timekeeping settings are managed in this page. Users can choose to
set date and time manually once or to use a time synchronization protocol (NTP), which will
keep time synchronized to a server over network.
Before you set the time please make sure that your time zone is valid (has the correct continent
/ Capital City). You can do this by using the Time zone’s drop-down list.
For manual time adjustment, either enter date and time in the corresponding fields, or
click
to adjust the internal clock of the camera according to the PC’s clock.
Please note that the latter is a one-time adjustment only, it will not keep the camera synchronized
to the client PC.
Continuous synchronization is based on NTP (Network Time Protocol). The following settings are
available with
NTP client
:
Off:
no NTP synchronization
