Argus E25 MOD II - Operating Instructions
14
Storing and transporting the
unit
ATTENTION!
Incorrect storage or transport can
damage the unit.
Close all openings with the
covers supplied or similar co-
vers.
Make sure the unit is dry and
protected from corrosive at-
mospheres where it is stored.
Contact the manufacturer for
advice if you need to store or
transport the unit under other
conditions.
Storing the Actuator
Store the unit only under the following
conditions:
Do not store it for more than 24
months.
Close all connection openings with the
covers supplied or similar covers.
The connection surfaces and sealing
surfaces must be protected against
mechanical damage.
The unit and all its components must
be protected from blows and shocks.
Secure the unit to prevent it falling or
tipping.
The unit shall only be installed indoors
under the following environmental
conditions:
Relative humidity below 50%, non-
condensing
The room air must be clean and not
contain salt or other corrosive sub-
stance
Temperature 5 - 40 °C.
When storing, make sure these condi-
tions apply at all times.
Contact the manufacturer for advice if
you need to store the unit for longer or
under other conditions.
Summary of Contents for 671020
